Hi Flowment Filter Cartridge
The Hi-Flowment Filter cartridge is a new product developed by Darlly Filter Equipment Co. in Hangzhou China.It has a 6 inch/152mm large diameter, and is coreless, single open-ended with an inside to outside flow pattern.The large diameter with big filter area insures to reduce the number of filter cartridges and the dimention of housing required..The long service life and high flowrate result in low investment and less manpower in many applications
﹡Gradient pore structure
﹡Up to 110M3/H flowrate per filter cartridge for water filtration.
﹡Maximum 50% reduction of filter system
﹡20.69 inch /525mm,40.69inch/1033mm and 60.69 inch/1541mm lengths are available
﹡All contaminants can be removed within the cartridge because of the flow direction.
Technical Specifications
●Materials of Components
*Filter media: Pleated glass fiber:Pleated depth Polypropylene(PP),or Melt blown PP
*Support/Drainage: Polypropylene(PP)
*End caps:Glass fiber reinforced Polypropylene
*O-ring seal:EPDM, NBR
●Removal Ratings
1um, 4.5um, 6um, 10um,20um,40um,70um,100um
●Outside Diameter: 6 inch(152mm)
●Length: 20.69 inch(525mm)/ 40.69 inch(1033mm)/ 60.69 inch(1541mm)
●Operating Conditions
*Maximum Operating Temperature:
*Pleated glass fiber:121℃;
*Pleated PP: 82℃;
*Melt Blown PP: 65℃
*Maximum Differential Pressure: Pleated glass fiber:3.4bar at 121℃
*Pleated PP: 3.4Bar at 82℃;
*Melt Blown:1.03Bar at 65℃
*Recommended Change out Differential Pressure:2.4Bar at 20℃.
*Suggested maximum Flow of water: 20.69 inch length:660LPM; 40.69 inch length:1,300LPM; 60.69 inch length:1,900LPM.
Applications
●Prefiltration of RO,Pretreatment of sea water desalination
●Condensate water filtration,hot water recovery in power generation
●API, solvents,and water filtration in BioPharm market
●The filtration of bottled water, high Fructose,edible oil,soft drinks,and milk
●Paints and coatings,Petrochemical,Refineries
●Microelectronics,film,fiber and resin
Part Numbers/Ordering Information
Darlly Hi-Flowment Filter cartridge P/N:
DLHF6* # = + (e.g., DLHF660PP20E)
Code * Cartridge Length(inch/mm) Code # Media Type
20 20.69/525 PP PP Pleated
40 40.69/1033 PM PP Melt Blown
60 60.69/1541 GF Pleated glass fiber
Code = Removal Rating Code + O-ring material
1 1um E EPDM
4.5 4.5um B Buna N
6 6um
10 10um
20 20um
40 40um
70 70um
100 100um