Pleated filter cartridge-PTFE
Product synopsis
PTFE series is constructed of imported natural hydrophobic Polytetrafluoroethylene membrane media and non-woven support materials. Adaptors are thermally welded with media without using any glue on it, so there is no possibilities to cause pollution.
Features
● Excellent chemical compatibility. Suitable for filtering organic solvents, acid bases.
● Pleated design increased the filtration area.
● low pressure drop, long service life
● Full range of removal ratings
Specifications
● Removal ratings: 0.1μm, 0.2μm, 0.45μm, 1μm, 3μm, 5μm, 10μm, 20μm, 30μm, 50μm
● Length: 10", 20", 30", 40"
● Outside diameter: 69mm
● Maximum operating temperature: 80℃ @1 bar,support adaptors are recommended for temperature exceeds 50℃
● Maximum operating differential pressure: 4.0bar ,normal temperature
● Maximum operating differential pressure (reverse direction): 2.0bar normal temperature
● Sterilization temperature time: 5times, 20 Minute cycles at 120℃
Applications
● Pharmaceutics
● Food and beverage
● Oil industry
● Semiconductor
● Chemical industry
Flow Rate vs. Differential Pressure
Order Information:
For example:
DLMPP-0100-10-III-V
PP, Rating: 1um, Length: 10",-222/Flat End, seal material: Viton
| rating | length | end cap type | seal material |
| 0010:0.1μm | 10:10" | �� :single open end | V:viton |
| 0022:0.22μm | 20:20" | Ⅱ:DOE | S:Silicone |
| 0045:0.45μm | 30:30" | Ⅲ:-222/flat end | E:epdm |
| 40:40" | Ⅳ:-222/fin | B:NBR | |
| Ⅴ:-226/flat end | T:Tefion | ||
| Ⅵ:-226/fin | |||
| Ⅶ:InnerO-ring/flat end | |||
Special Size:
OD83mm Part#: DLMPP83+ Rating+Length+End cap type + Seal Material
OD131mm Part#:DLMPP131+ Rating+Length+Endcap type+ Seal Material