Pleated filter cartridge—PTFE
Product synopsis
PTFE series is constructed of imported natural hydrophobic Polytetrafluoroethylene membrane media and non-woven support materials. Adaptors are thermally welded with media without using any glue on it, so there is no possibilities to cause pollution.
Features
● Excellent chemical compatibility. Suitable for filtering organic solvents, acid bases.
● Pleated design increased the filtration area.
● low pressure drop, long service life
● Full range of removal ratings
Specifications
● Removal ratings: 0.1μm, 0.2μm, 0.45μm, 1μm, 3μm, 5μm, 10μm, 20μm, 30μm, 50μm
● Length: 10", 20", 30", 40"
● Outside diameter: 69mm
● Maximum operating temperature: 80℃ @1 bar,support adaptors are recommended for temperature exceeds 50℃
● Maximum operating differential pressure: 4.0bar ,normal temperature
● Maximum operating differential pressure (reverse direction): 2.0bar normal temperature
● Sterilization temperature time: 5times, 20 Minute cycles at 120℃
Applications
● Pharmaceutics
● Food and beverage
● Oil industry
● Semiconductor
● Chemical industry
Flow Rate vs. Differential Pressure
Order Information:
For example:
DLMPP-0100-10-III-V
PP, Rating: 1um, Length: 10",-222/Flat End, seal material: Viton
| rating |
length |
end cap type |
seal material |
| 0010:0.1μm |
10:10" |
�� :single open end |
V:viton |
| 0022:0.22μm |
20:20" |
Ⅱ:DOE |
S:Silicone |
| 0045:0.45μm |
30:30" |
Ⅲ:-222/flat end |
E:epdm |
| |
40:40" |
Ⅳ:-222/fin |
B:NBR |
| |
|
Ⅴ:-226/flat end |
T:Tefion |
| |
|
Ⅵ:-226/fin |
|
| |
|
Ⅶ:InnerO-ring/flat end |
|
| |
|
|
|
| |
|
|
|
Special Size:
OD83mm Part#: DLMPP83+ Rating+Length+End cap type + Seal Material
OD131mm Part#:DLMPP131+ Rating+Length+Endcap type+ Seal Material
